Supported Phones
We support the following phones using automatic provisioning. However, all standard SIP phones should work with NethVoice. For phones not listed as supported, it is possible to create custom provisioning templates using Tancredi.
NethPhone
FIRMWARE Version 2.0 or higher
- NP-X3
- NP-V61
- NP-X5
- NP-X210
Fanvil
FIRMWARE Version 2.0 or higher
- V61, V62, V63, V64, V65, V67
- X1/S/SP
- X210
- X3/S/SP/G/SG, X3U, X3U Pro
- X4/G/SG, X4U, X4U-V2
- X5S, X5U, X5U-V2
- X6, X6U, X6U-V2
- X7A/C
- X301/P/G/W, X303/P/G/W
- H2U, H2U-V2, H5
Yealink
FIRMWARE Version 0.86 or higher
- T19(P) E2, T21(P) E2, T23P/G, T27G, T29G
- T30/P, T31/P/G/W, T33P/G, T34W
- T40P/G, T41P/S/U, T42G/S/U, T43U, T44U/W, T46G/S/U, T48G/S/U, T49G
- T52S, T53/W/C, T54S/W, T56A, T57W, T58V/A/W, VP59
- T73U/W, T74U/W, T77U
- T85W, T87W, T88W
- AX83H, AX86R
Snom
FIRMWARE Version 8.7.5 or higher
- D120, D140, D150
- D305, D315, D345, D375, D385
- D710, D712, D713, D715, D717, D725, D735, D745, D765, D785
- D812, D815, D862, D865
note
The Snom D862 and D865 phones do not support HTTP commands, so it is not possible to use click-to-call.
Gigaset
FIRMWARE Version 3.15.9 or higher
- Maxwell Basic, Maxwell 2, Maxwell 3, Maxwell 4
Provisioning compatibility
The following table summarizes the provisioning methods used by each manufacturer at the phone's first boot.
| Manufacturer | Primary method | Secondary method | DHCP option | DHCP option value |
|---|---|---|---|---|
| NethPhone | RPS | DHCP | 66 | http://IP_PHONE_SYSTEM/provisioning/$mac.cfg |
| Fanvil | RPS | DHCP | 66 | http://IP_PHONE_SYSTEM/provisioning/$mac.cfg |
| Yealink | RPS | DHCP | 66 | http://IP_PHONE_SYSTEM/provisioning/$MAC.cfg |
| Snom | RPS | DHCP | 66 and 67 | http://IP_PHONE_SYSTEM/provisioning/{mac}.xml |
| Gigaset | DHCP1 | RPS | 114 | http://IP_PHONE_SYSTEM/provisioning/%MACD.xml |
For a complete list of provisioning parameters, see Provisioning Parameters.